Premium General Purpose Polyester Resin. Contain wax or ask for the No-wax Resin. Requires 1/2 % to 2 % MEKP hardener. You may vary amounts of MEKP to slow, or speed up cure time. But can't add below ½ %, or exceed 2%. Must be mixed thoroughly for a minimum of 2 minutes. Gel Time 20-30 minutes at approx 77 degrees Fahrenheit. Complete cure 45 minutes to 3 hours. Do not use below 60 degrees Fahrenheit.
WHITE GEL COAT WITH WAX...Requires 1/2% to 2% MEKP...Gel Time is 15-25 Minutes Can be brushed, rolled on.
Resin Consumption: 2 parts resin, 1 part glass, by weight. Remove air with a Bubble Buster Roller. May Recoat within 24 hours without sanding with Resin with No-wax. Sanding is Require with Resin with wax.
Is not UV stabilized and should be coated with gel coat. May be thinned with styrene by adding no more than 8% by volume. May add fillers to make putty. May add up to 4oz of pigment to a gallon Resin or Gelcoat, for coloring. Clean up with acetone.
Tiada ulasan:
Catat Ulasan